Date   

Logging Infrastructure for CF components

Ronak Banka
 

Hi everyone,

I have some queries regarding persistent storage of application logs and cf
component logs .

As per my understanding

-->For application logs:
we can send the application logs to doppler with help of metron agent and
further stream using traffic controller (User Side).

-->For CF component syslog:
We can send cf component syslog via metron to custom syslog endpoint
(followed by parsing and other mining stuff)

On the operator side how can we store "Application logs for all the
applications" to a persistent storage??

If i look at firehose (or using noaa to get all the logs), it is more like
pulling model from end component side so if components before it are slow
in sending logs then there will be buffers .

Application logs are distributed on different doppler nodes based on AZ of
metron and doppler itself , so is there a need to implement something in
between doppler and traffic controller to push all the application logs ??

Thanks
Ronak Banka


TOSCA Compliance within Cloud Foundry

Deepak Vij
 

Hi folks, I would like to start an email discussion on this particular topic. As we all know that "BOSH" is the prevalent orchestration mechanism employed within Cloud Foundry. However, TOSCA (Topology and Orchestration Specification for Cloud Applications) standard based orchestration is getting big traction in the software industry recently. I brought this issue up in one of the recent CAB meetings as far as support for TOSCA standard within Cloud Foundry environment. At that time, folks from IBM & SAP did show interest in pursuing this further. I would like to follow up on that in the hope of pursuing this further. Following is a brief description to this regards.

Because of the complex service topologies which are especially present in the Cloud environment, the paradigm of model-driven management of services and their underlying infrastructure is getting a big traction in the software industry. TOSCA is such a standard supported by prominent companies in the industry. TOSCA essentially enables the specification of portable topology models. TOSCA has the combination of declarative descriptions of the application topology with all its components - including the load balancer, network, the compute resources, software and everything else, along with an imperative set of workflows to describe the logic of any process we need to automate.

From Telecom industry perspectives, TOSCA is very good when it comes to defining virtual application topologies, dependencies and relationships, actions to be performed as part of a lifecycle. This significantly simplifies the complexities involved with exposing networking elements and end-to-end lifecycle management for NFV (Network Function Virtualization), by abstracting the networking piece of deployment into an application blueprint. The fact that industry such as Telecom is known to be very standards driven, TOSCA is becoming quite prominent as part of the ongoing "Network Function Virtualization" initiatives.

Juju is yet another model-drive approach. However it is tightly bound to Ubuntu Linux. Based on my understanding, folks at Altoros have recently been able to deploy Cloud Foundry environment purely using Juju instead of BOSH. Maybe, we can leverage lot of this Juju work in order to be able to port "BOSH" environment towards standards based TOSCA environment.

I think pursuing this effort would be a win-win for the whole CF community. I would look forward to feedback from the community on this topic. Thanks.

Regards,
Deepak Vij


Re: [cf-bosh] Links to Nabble archives of the CF lists

Christopher B Ferris <chrisfer@...>
 

+! nice job!

Cheers,

Christopher Ferris
IBM Distinguished Engineer, CTO Open Cloud
IBM Software Group, Open Technologies
email: chrisfer(a)us.ibm.com
twitter: @christo4ferris
blog: http://thoughtsoncloud.com/index.php/author/cferris/
phone: +1 508 667 0402



From: Chip Childers <cchilders(a)cloudfoundry.org>
To: "Huber, Aaron M" <aaron.m.huber(a)intel.com>
Cc: "cf-dev(a)lists.cloudfoundry.org"
<cf-dev(a)lists.cloudfoundry.org>,
"cf-lattice(a)lists.cloudfoundry.org"
<cf-lattice(a)lists.cloudfoundry.org>,
"cf-bosh(a)lists.cloudfoundry.org"
<cf-bosh(a)lists.cloudfoundry.org>
Date: 05/06/2015 01:51 PM
Subject: Re: [cf-dev] [cf-bosh] Links to Nabble archives of the CF lists
Sent by: cf-dev-bounces(a)lists.cloudfoundry.org



Thanks Aaron!

Chip Childers | Technology Chief of Staff | Cloud Foundry Foundation

On Wed, May 6, 2015 at 4:28 PM, Huber, Aaron M <aaron.m.huber(a)intel.com>
wrote:
I’ve created Nabble archives of the CF lists here:





http://cf-bosh.70367.x6.nabble.com/


http://cf-dev.70369.x6.nabble.com/


http://cf-lattice.70370.x6.nabble.com/





The archives are searchable and allow web viewing of the mailing list
without subscribing via email.  There is also an RSS feed for each list.





Aaron

_______________________________________________
cf-bosh mailing list
cf-bosh(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-bosh

_______________________________________________
cf-dev mailing list
cf-dev(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-dev


Re: [cf-bosh] Links to Nabble archives of the CF lists

Chip Childers <cchilders@...>
 

Thanks Aaron!

Chip Childers | Technology Chief of Staff | Cloud Foundry Foundation

On Wed, May 6, 2015 at 4:28 PM, Huber, Aaron M <aaron.m.huber(a)intel.com>
wrote:

I’ve created Nabble archives of the CF lists here:



http://cf-bosh.70367.x6.nabble.com/

http://cf-dev.70369.x6.nabble.com/

http://cf-lattice.70370.x6.nabble.com/



The archives are searchable and allow web viewing of the mailing list
without subscribing via email. There is also an RSS feed for each list.



Aaron

_______________________________________________
cf-bosh mailing list
cf-bosh(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-bosh


Re: [cf-bosh] Links to Nabble archives of the CF lists

Dieu Cao <dcao@...>
 

+1
Nice work Aaron!

On Wed, May 6, 2015 at 1:28 PM, Huber, Aaron M <aaron.m.huber(a)intel.com>
wrote:

I’ve created Nabble archives of the CF lists here:



http://cf-bosh.70367.x6.nabble.com/

http://cf-dev.70369.x6.nabble.com/

http://cf-lattice.70370.x6.nabble.com/



The archives are searchable and allow web viewing of the mailing list
without subscribing via email. There is also an RSS feed for each list.



Aaron

_______________________________________________
cf-bosh mailing list
cf-bosh(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-bosh


Links to Nabble archives of the CF lists

Aaron Huber
 

I've created Nabble archives of the CF lists here:

http://cf-bosh.70367.x6.nabble.com/
http://cf-dev.70369.x6.nabble.com/
http://cf-lattice.70370.x6.nabble.com/

The archives are searchable and allow web viewing of the mailing list without subscribing via email. There is also an RSS feed for each list.

Aaron


Re: Which components can be HA?

John Wong
 

Hi Dieu

Thank you for the answers. They are very helpful.

Regarding #4, you are right, I believe when I do CF deployment I get these
short-lived VMs that compile different CF jobs.

Regarding #5, I think it is doppler in our latest deployment (v193, I know
still behind the most current version). I think in very old CF version
there used to be

loggreator_traffic
loggreator
syslog_loggreator

(as seen in the documentation mentions syslog loggreator).

So we probably don't need to worry about syslog then.


It seems like these are the one we can run >=2
NAT
DEA
UAA
HM9000
CC
Workers
Doppler
Log traffic controller
Gorouter
NFS (use s3 in our case)
Postgres (use RDS in our case)


These are the one not to run with > 1
collector
bosh
clock


Not sure:
stats server (metro agent?)


Thanks.

John

On Wed, May 6, 2015 at 2:27 AM, Dieu Cao <dcao(a)pivotal.io> wrote:

1) I'll ask our doc team to clarify the title of the section.
It's not recommended to run more than 1 collector. This component
collects metrics from system components. We use it in combination with
Datadog to monitor the many components of cloud foundry. This component is
not strictly required for an HA system.

2) HM9000 can have multiple active instances. No need for a standby mode.

3) The Cloud Controller clock periodically schedules Cloud Controller
clean up tasks for app usage events, audit events, failed jobs, and more.
Only single instance of this job is necessary.

4) Likely the job called api_workers is actually the cloud controller
workers. These are not compilation vms.
Cloud Controller worker processes background tasks submitted via clients
of the api.

5) I'm not sure what you mean by this. Do you mean loggregator? or doppler?

-Dieu
CF Runtime PM

On Tue, May 5, 2015 at 1:19 PM, John Wong <gokoproject(a)gmail.com> wrote:

Hi

Is http://docs.cloudfoundry.org/concepts/high-availability.html up to
date?

1) Why is collector listed 1 but in scalable process table?

2) How do you run a second Health Manager in standby mode if only 1 can
run at any time?

3) Do we still need clock job? Is it also 1 instance?

4) I notice I have a job called api_workers, and I believe that's
compilation machine. I run two of these 24x7, is that necessary? The doc
said it is active if we need to compile things (say deploying a new
release). Is that all? I don't think they handle application code
compilation.

5) What about syslog? Can it have 2? I understand we have to choose what
to be HA or not...I am not sure "the BOSH resurrector will recover the VM
if it becomes non-responsive" convinces me because all of these jobs are
deployed with BOSH but if BOSH is down I am facing some outage. I know Dr.
Nic has some article regarding HA bosh.


Correct me if I am wrong.

Thanks.

John

_______________________________________________
cf-dev mailing list
cf-dev(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-dev


Utilities PMC - 2015-05-05 Notes

Mike Dalessio
 

Hey everyone,

We held the first Utilities PMC meeting yesterday; I'd like to share the
agenda and notes.

For reference, all agendas notes for the Utilities PMC will be kept in a
public Google Drive folder at this URL:

http://bit.ly/cf-utilities-pmc


I realize GDrive isn't the most convenient medium for some in the CF
community; I'd love to hear how we can better support transparency for
everyone.

Please feel free to respond with comments and questions!

Cheers,
-m

---

*Attendees:*

- Chip Childers, Cloud Foundry Foundation
- Mike Dalessio, Pivotal (PMC lead)
- Christopher Ferriss, IBM
- Michael Fraenkel, IBM
- James Bayer, Pivotal
- Greg Oehmen, Pivotal
- Ryan Morgan, PIvotal


Utilities PMC Agenda and Notes - 2015-05-05


1.

Update on CI tools (Mike Dalessio)
2.

Update on CLI (Greg Oehman)
3.

Update on Eclipse plugin and Java tools (Ryan Morgan)
4.

Open Discussion



Update on CI tools (Mike Dalessio)

GoCD <http://www.go.cd/> still in use for some projects, but there’s
movement towards Concourse <http://concourse.ci/> and teams are
enthusiastic about it. Currently Diego, Garden, BOSH-lite, Loggregator, and
CLI have converted to Concourse; and BOSH, Services API, and Buildpacks are
in progress.

Timeline is open for individual teams to move to Concourse; some teams may
decide not to. Having a heterogenous CI environment is OK, as both GoCD and
Concourse can integrate via S3 buckets, which is where generated artifacts
are generally kept.


Update on CLI (Greg Oehmen)


Released 6.11.0 - 4/17

Released 6.11.1 - 4/20

Released 6.11.2 - 4/28

Big uptick in issues/PRs

Plugin API feature

Look Ahead:

1. help refactor work,

- refactor help

- invert syntax (object - action)

- tab/bash completion

2. support the move to cc API 3.0 and services api changes

3. the user security work (pwd expiration, inactivity-based session
timeout, RBAC maturation, etc.)

4. installer emphasis

- Auto-update within CLI

- signed mac installer

- signed windows installer

- etc

5. APM integration - something like blessed-contrib:
https://github.com/yaronn/blessed-contrib


Update on Eclipse plugin and Java tools (Ryan Morgan)

CF Eclipse Tooling: (1 dev at Pivotal, 4 splitting time at IBM)

-

1.8.0 (Released Feb 13th)
-

New Service wizard allowing for multiple service creation
-

Remote debug support via ngrok.com
-

1.8.1 (Released March 25th)
-

Map/Unmap project feature to map an existing eclipse workspace to an
app
-

Update password fixes
-

Free service plans now marked in the UI and preferred over paid plans
-

1.8.2 (Release imminent)
-

JRebel support
-

Working on some last minute UI changes
-

Working on a proposal to move the Eclipse tooling to the Eclipse
Foundation
-

Should have a proposal for review mid-late May. Targeting Eclipse
4.5 SR1 update in the fall. Lots of work to be done to make
that deadline.


CF Java Client: (1 dev at Pivotal, splitting time)

-

1.1.2 Released April 13th
-

No active development, PRs and Issues reviewed on-demand
-

Support of CC v3
-

Removal of Spring dependencies (v2.0 item)



Open Discussion

Please add any other suggested agenda topics for discussion here:

*Imminent additions to the Utilities PMC from HP (Chip).*

Voting took place via email on 2015-05-05 with unanimous consent to add the
following to the Utilities PMC as incubating projects:


- CF .NET SDK https://github.com/hpcloud/cf-dotnet-sdk
- CF Visual Studio Extension
https://github.com/hpcloud/cf-vs-extension-wpf
(will be renamed to https://github.com/hpcloud/cf-vs-extension)
- CF MSBuild Tasks https://github.com/hpcloud/cf-msbuild-tasks


Removing Jackson 1 support from UAA

Filip Hanik
 

The UAA team is currently upgrading Spring Framework dependencies in order
to stay up to date and be able to receive security and feature updates
faster.

With the story
https://www.pivotaltracker.com/story/show/93706906

the spring framework has dropped support for Jackson 1
(org.codehaus.jackson).
We have decided to follow the same path, rather than increasing our testing
matrix and try to be backwards compatible,.

With this upgrade, we instead will be supporting Jackson 2,
https://github.com/cloudfoundry/uaa/issues/108
directly from our classes.

While we attempt to be backwards compatible in most of our upgrade
scenarios, this one was instance we decided against it since Jackson 1 has
not had any software releases since 2013, and we most likely can't expect
any fixes against this library.

Feel free to ask any questions or raise any concerns. As a result, next UAA
release will be bumped to 2.3.x

Filip


Can't Create Service Instance in Cloud Foundry

Matthew Landry <mhlandry@...>
 

I'm trying to get the introduction to spring cloud
<https://spring.io/blog/2014/06/03/introducing-spring-cloud> app working
with an instance of Cloud Foundry that I'm running on my machine. I tried
to push the app and I get this message:

Could not find service postgres-service to bind to
hello-spring-cloud

That makes sense to me so I started tracking down the postgres service.
When I run `cf marketplace`, I get:

service plans description
mongodb default MongoDB NoSQL database
postgresql default PostgreSQL database
rabbitmq default RabbitMQ message queue
redis default Redis key-value store

When I try to create a service instance of the postgresql service and I
get:

$ cf create-service postgresql default postgresql-service
Creating service instance postgresql-service in org xyz / space
development as admin...
FAILED
Server error, status code: 500, error code: 10001, message: Service
broker error: Not authorized

Here are the permissions for the space:

Getting users in org xyz / space development as admin

SPACE MANAGER
admin

SPACE DEVELOPER
Admin

The cf service-access command doesn¹t yield anything interesting:

$ cf service-access
Getting service access as admin

Then it shows nothing on the terminal. So I tried to enable service access

$ cf enable-service-access postgresql
Enabling access to all plans of service postgresql for all orgs as
admin...
All plans of the service are already accessible for all orgs
OK

For the life of me, I can¹t figure out what¹s going on. I posted a
question to Stack Overflow <
http://stackoverflow.com/questions/30034143/cant-create-service-instance-in-cloud-foundry>
and was referred here after some debugging
attempts were fruitless. Anybody got any ideas?


Re: Which components can be HA?

Dieu Cao <dcao@...>
 

1) I'll ask our doc team to clarify the title of the section.
It's not recommended to run more than 1 collector. This component collects
metrics from system components. We use it in combination with Datadog to
monitor the many components of cloud foundry. This component is not
strictly required for an HA system.

2) HM9000 can have multiple active instances. No need for a standby mode.

3) The Cloud Controller clock periodically schedules Cloud Controller clean
up tasks for app usage events, audit events, failed jobs, and more. Only
single instance of this job is necessary.

4) Likely the job called api_workers is actually the cloud controller
workers. These are not compilation vms.
Cloud Controller worker processes background tasks submitted via clients of
the api.

5) I'm not sure what you mean by this. Do you mean loggregator? or doppler?

-Dieu
CF Runtime PM

On Tue, May 5, 2015 at 1:19 PM, John Wong <gokoproject(a)gmail.com> wrote:

Hi

Is http://docs.cloudfoundry.org/concepts/high-availability.html up to
date?

1) Why is collector listed 1 but in scalable process table?

2) How do you run a second Health Manager in standby mode if only 1 can
run at any time?

3) Do we still need clock job? Is it also 1 instance?

4) I notice I have a job called api_workers, and I believe that's
compilation machine. I run two of these 24x7, is that necessary? The doc
said it is active if we need to compile things (say deploying a new
release). Is that all? I don't think they handle application code
compilation.

5) What about syslog? Can it have 2? I understand we have to choose what
to be HA or not...I am not sure "the BOSH resurrector will recover the VM
if it becomes non-responsive" convinces me because all of these jobs are
deployed with BOSH but if BOSH is down I am facing some outage. I know Dr.
Nic has some article regarding HA bosh.


Correct me if I am wrong.

Thanks.

John

_______________________________________________
cf-dev mailing list
cf-dev(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-dev


Runtime PMC - 2015-05-04 Notes

Dieu Cao <dcao@...>
 

Hi,

We held the first Runtime PMC bi-weekly meeting today.
Following on Mike D's lead, I'd like to share the notes from the meeting.
http://bit.ly/cf-runtime-pmc

-Dieu
CF Runtime PM

---

CF Runtime PMC

May 5, 2015

Attendees:

Chip Childers

Alex Tarpinian

Chris Sterling

Chris Ferris

Atul Kshirsagar

Michael Fraenkel

Steve Winkler

Mark Kropf

Zach Robinson

Erik Jasiak

Sree Tummidi

Dieu Cao

Eric Malm

Onsi Fakhouri


Proposal to move cfoundry to the cloudfoundy-attic

It’s not being maintained.

No objections raised during the PMC

Backlog reviews of:

Runtime

-

nearly complete with Route API and context path routing
-

Proposal to be sent out later this week for basic rate limiting for
cloud controller to protect against users DOS’ing cloud controller
-

Work planned soon to move to Concourse for CI
-

Inception on Friday for rate limiting for CC and route services

UAA

-

wrapping up LDAP multi-tenancy support
-

starting on handling SAML attributes in tokens
-

password policies is up after SAML support

LAMB

-

Discovered dopplers were more cpu/thread-bound than thought
-

Needed to unwind some goals until doppler efficiency improved.
-

Fix is in progress and going well.
-

Up next #1 - Will bring back nozzles when pipeline can handle load
-

Up next #2 - Working with Runtime on etcd upgrade.
-

Up next #3 -


Diego

-

Completed 50-cell performance experiments and generated stories, will
start 100-cell one soon
-

SSH access to containers progressing, currently setting up
app/space/system access policies in CC and external routability
-

stories to come soon for versioning releases and schemas and improving
inter-component security

Greenhouse

-

Tracking the Diego release well and hopes to have their first release
coordinated with the first Diego release.
- Greenhouse team working with Century Link and HP to improve container
isolation.


stdout.log and stderr.log not show in CF197 with loggregator enabled

Tina Zhang
 

Hi,

We upgrade from CF172 to CF197 and enable loggregator on CF197. But for application deployed to CF197 (with loggregator enabled), we DO NOT
see stdout.log and stderr.log anymore in application logs directory anymore. We can see logs/stdout.log and logs/stderr.log in CF172.

CF197:
cf file <app> logs
Getting file contents... OK

staging_task.log 1.3K

Can you tell us what setting in CF 197 can affect stdout.log and stderr.log show up or not? How to let logs/stdout.log and logs/stderr.log show up?

Thanks,
Tina Zhang


Re: UAA with external openid connect

Mike Youngstrom
 

Sounds good, thanks Sree!

Mike

On Tue, May 5, 2015 at 5:00 PM, Sree Tummidi <stummidi(a)pivotal.io> wrote:

Hi Mike,
You would need to use SAML for this integration. UAA can act as an OpenID
Connect Identity provider but not Relying Party which is required in this
case.
We support SAML 2.0 Identity Providers.


Thanks,
Sree Tummidi
Sr. Product Manager
Identity - Pivotal Cloud Foundry


On Tue, May 5, 2015 at 3:52 PM, Mike Youngstrom <youngm(a)gmail.com> wrote:

We are looking at revamping the UAA integrations we are using for our
deployments.

Our enterprise authentication provider supports SAML and OpenID Connect
for single signon. I know that UAA supports SAML. Is it possible to use
our enterprise OpenID Connect provider to authenticate for UAA OAuth? Or
should I just use SAML?

Mike

_______________________________________________
cf-dev mailing list
cf-dev(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-dev


UAA with external openid connect

Mike Youngstrom
 

We are looking at revamping the UAA integrations we are using for our
deployments.

Our enterprise authentication provider supports SAML and OpenID Connect for
single signon. I know that UAA supports SAML. Is it possible to use our
enterprise OpenID Connect provider to authenticate for UAA OAuth? Or
should I just use SAML?

Mike


Project Lead Change for Diego and Garden Incubating Projects

Chip Childers <cchilders@...>
 

Onsi Fakhouri has resigned from the runtime PMC's Diego and Garden
incubating projects, given his new $dayjob responsibilities at Pivotal.

Eric Malm will be stepping in to take his place for the Diego project.

Will Pragnell will be stepping in to take his place for the Garden project.

Thanks!

-chip

Chip Childers | Technology Chief of Staff | Cloud Foundry Foundation


Which components can be HA?

John Wong
 

Hi

Is http://docs.cloudfoundry.org/concepts/high-availability.html up to date?

1) Why is collector listed 1 but in scalable process table?

2) How do you run a second Health Manager in standby mode if only 1 can run
at any time?

3) Do we still need clock job? Is it also 1 instance?

4) I notice I have a job called api_workers, and I believe that's
compilation machine. I run two of these 24x7, is that necessary? The doc
said it is active if we need to compile things (say deploying a new
release). Is that all? I don't think they handle application code
compilation.

5) What about syslog? Can it have 2? I understand we have to choose what to
be HA or not...I am not sure "the BOSH resurrector will recover the VM if
it becomes non-responsive" convinces me because all of these jobs are
deployed with BOSH but if BOSH is down I am facing some outage. I know Dr.
Nic has some article regarding HA bosh.


Correct me if I am wrong.

Thanks.

John


Purge files on NFS or S3?

John Wong
 

Hi

I just looked at our disk usage on NFS server. We have used like 200G so
far, and I wonder if there's a systematic way to purge files we don't need
(or how do I know I don't need them)?

Similarly, if I were to replace NFS server with S3 instead, does the
existing process (if any) work with S3?

Thanks.


HP Incubator Proposals for Microsoft "Stack" Support

Chip Childers <cchilders@...>
 

All,

HP is proposing a sizable donation of code into the Cloud Foundry
Foundation's incubation program. This represents a collection of projects
that together provide support for a full stack of Microsoft technologies
for Cloud Foundry. This includes a Visual Studio Extension, MS Buildpack,
.NET SDK for the Cloud Controller API, Windows-based DEAs and a SQL Server
service broker implementation.

Gert Drapers (from HP) and I have been working with Mark Kropf, Mike
Dalessio and several members of the Greenhouse incubating project to plan
out how we can accept this into the incubator, as well as working with HP
on a plan to onboard their engineering team via the Dojo program.

I've grouped each repository that is being proposed for donation into the
applicable PMC and noted what project (existing or new) would manage the
code.

Comments are welcome, and we will be working with each PMC directly to
ensure consensus.

*Runtime PMC*

These two repositories would land in the existing Greenhouse incubating
project, and HP engineers will join that project via the Dojo program.
While this implementation is an alternative to the approach that is
currently being taken by the Greenhouse project, it is implemented for the
DEA architecture (vs. Diego). The work of the expanded Greenhouse project
will be to rationalize the multiple approaches and determine what the
combined architectural path will be for the future.

Windows Prison (isolation code)
https://github.com/hpcloud/cf-windows-prison

Windows Extensions (WinDEA for CFv2)
https://github.com/hpcloud/cf-windows-extensions

Additionally, there are two build packs being donated, which will (for now)
incubate within the runtime PMC’s Greenhouse project. The goal would be to
move these to the Buildpacks PMC at the same time that the Greenhouse work
moves from incubating to active.

Core build pack used by the DEA (Windows Extensions)
https://github.com/hpcloud/hp-buildpack-iis8, we should rename this to
cf-iis8-buildback or cf-buildpack-iis8

Static Windows executable build pack
https://github.com/hpcloud/cf-exe-buildpack

*Services PMC*

The SQL Server service broker proposed below would be a new incubating
project for the Services PMC. HP engineers would be the initial committers
for this project within the Services PMC. We will work to identify the
appropriate project lead for the new incubating project.

Microsoft SQL Server Service Broker (v2 broker written in go)
https://github.com/hpcloud/cf-mssql-broker

*Utilities PMC*

The .NET SDK and and Visual Studio Extension / MSBuild Tasks projects would
be two new incubating projects within the Utilities PMC, similar to how we
have the Java Tools and Eclipse Plugin projects today. HP engineers would
be the initial committers for these projects within the Utilities PMC. We
will work to identify the appropriate project lead for the new incubating
projects.

CF .NET SDK
https://github.com/hpcloud/cf-dotnet-sdk

CF Visual Studio Extension
https://github.com/hpcloud/cf-vs-extension-wpf will be renamed to
https://github.com/hpcloud/cf-vs-extension

CF MSBuild Tasks
https://github.com/hpcloud/cf-msbuild-tasks


-chip

Chip Childers | Technology Chief of Staff | Cloud Foundry Foundation


Re: [vcap-dev] Proposal to bring Service Broker for Apache Brooklyn and CLI-Plugin into Incubator

Chip Childers <cchilders@...>
 

The proposal will be reviewed on Thursday by the Services PMC. Thanks
Duncan!

Chip Childers | Technology Chief of Staff | Cloud Foundry Foundation

On Mon, May 4, 2015 at 8:42 PM, Duncan Johnston Watt <
duncan.johnstonwatt(a)cloudsoftcorp.com> wrote:

Chip/All

Just following up on this proposal on the new list to get an update on its
status.

Best

Duncan


On 22 April 2015 at 14:49, Chip Childers <cchilders(a)cloudfoundry.org>
wrote:

General feedback is desired here from the whole community, so speak up!

After that feedback, we will work within the Services PMC to accept (or
deny) this code contribution into the incubator for that PMC.

Chip Childers | Technology Chief of Staff | Cloud Foundry Foundation

On Wed, Apr 22, 2015 at 6:22 AM, Robert Moss <
robert.moss(a)cloudsoftcorp.com> wrote:

Hi All,

I've put together a proposal[1] to bring the Service Broker for Apache
Brooklyn and CLI-Plugin into the Incubator. If you haven't yet seen, I
wrote a series of blog posts with videos[2][3][4] describing them. Looking
forward to your feedback.

Robert

[1]
https://docs.google.com/a/cloudsoftcorp.com/document/d/15HuoflKjf5dbrbuTHGVE7kyniIBADUh24MmYBXU-CYw/edit#heading=h.qnq5iz827eiu
[2]
http://www.cloudsoftcorp.com/blog/2015/02/integrating-cloud-foundry-apache-brooklyn-part-1-service-broker/
[3]
http://www.cloudsoftcorp.com/blog/2015/02/integrating-cloud-foundry-apache-brooklyn-part-2-brooklyn-plugin/
[4]
http://www.cloudsoftcorp.com/blog/2015/04/integrating-cloud-foundry-with-apache-brooklyn-part-3-managing-services/

--
You received this message because you are subscribed to the Google
Groups "Cloud Foundry Developers" group.
To view this discussion on the web visit
https://groups.google.com/a/cloudfoundry.org/d/msgid/vcap-dev/318d03e2-581c-4cf1-93b5-1178defe38d7%40cloudfoundry.org
<https://groups.google.com/a/cloudfoundry.org/d/msgid/vcap-dev/318d03e2-581c-4cf1-93b5-1178defe38d7%40cloudfoundry.org?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"Cloud Foundry Developers" group.
To view this discussion on the web visit
https://groups.google.com/a/cloudfoundry.org/d/msgid/vcap-dev/CAD1Pwce9cTJtevYhozkzYen%3DmqF0rz0Xnq9OHG%2Bhv5AvcS%3DdHQ%40mail.gmail.com
<https://groups.google.com/a/cloudfoundry.org/d/msgid/vcap-dev/CAD1Pwce9cTJtevYhozkzYen%3DmqF0rz0Xnq9OHG%2Bhv5AvcS%3DdHQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
.

To unsubscribe from this group and stop receiving emails from it, send
an email to vcap-dev+unsubscribe(a)cloudfoundry.org.


--
Duncan Johnston-Watt
CEO | Cloudsoft Corporation

Twitter | @duncanjw
Mobile | +44 777 190 2653
Skype | duncan_johnstonwatt
Linkedin | www.linkedin.com/in/duncanjohnstonwatt

Cloudsoft Corporation Limited, Registered in Scotland No: SC349230.
Registered Office: 13 Dryden Place, Edinburgh, EH9 1RP

This e-mail message is confidential and for use by the addressee only. If
the message is received by anyone other than the addressee, please return
the message to the sender by replying to it and then delete the message
from your computer. Internet e-mails are not necessarily secure. Cloudsoft
Corporation Limited does not accept responsibility for changes made to this
message after it was sent.

Whilst all reasonable care has been taken to avoid the transmission of
viruses, it is the responsibility of the recipient to ensure that the
onward transmission, opening or use of this message and any attachments
will not adversely affect its systems or data. No responsibility is
accepted by Cloudsoft Corporation Limited in this regard and the recipient
should carry out such virus and other checks as it considers appropriate.

_______________________________________________
cf-dev mailing list
cf-dev(a)lists.cloudfoundry.org
https://lists.cloudfoundry.org/mailman/listinfo/cf-dev

9381 - 9400 of 9422