Date   

Re: Import large dataset to Postgres instance in CF

Nicholas Calugar
 

Hi Siva,

1. If you run the PostgreSQL, you likely want to temporarily open the
firewall to load data or get on a jump box of some sort that can access the
database. It's not really a CF issue at this point, it's a general issue of
seeding a database out-of-band from the application server.
2. If the above isn't an option and your CF is running Diego, you could
use SSH to get onto an app container after SCPing the data to that
container.
3. The only other option I can think of is writing a simple app that you
can push to CF to do the import.

Hope that helps,

Nick

On Wed, Dec 9, 2015 at 3:08 PM Siva Balan <mailsiva(a)gmail.com> wrote:

Hi Nick,
Your Option 1(Using psql CLI) is not possible since there is a firewall
that only allows connection from CF apps to postgres DB. Apps like psql CLI
that are outside of CF have no access to the postgres DB.
I just wanted to get some thoughts from this community since I presume
many would have faced a similar circumstance of importing large sets of
data to their DB which is behind a firewall and accessible only through CF
apps.

Thanks
Siva

On Wed, Dec 9, 2015 at 2:27 PM, Nicholas Calugar <ncalugar(a)pivotal.io>
wrote:

Hi Siva,

You'll have to tell us more about how your PostgreSQL and CF was
deployed, but you might be able to connect to it from your local machine
using the psql CLI and the credentials for one of your bound apps. This
takes CF out of the equation other than the service binding providing the
credentials.

If this doesn't work, there are a number of things that could be in the
way, i.e. firewall that only allows connection from CF or the PostgreSQL
server is on a different subnet. You can then try using some machine as a
jump box that will allow access to the PostgreSQL.

Nick

On Wed, Dec 9, 2015 at 9:40 AM Siva Balan <mailsiva(a)gmail.com> wrote:

Hello,
Below is my requirement:
I have a postgres instance deployed on our corporate CF deployment. I
have created a service instance of this postgres and bound my app to it.
Now I need to import a very large dataset(millions of records) into this
postgres instance.
As a CF user, I do not have access to any ports on CF other than 80 and
443. So I am not be able to use any of the native postgresql tools to
import the data. I can view and run simple SQL commands on this postgres
instance using the phppgadmin app that is also bound to my postgres service
instance.
Now, what is the best way for me to import this large dataset to my
postgres service instance?
All thoughts and suggestions welcome.

Thanks
Siva Balan

--
http://www.twitter.com/sivabalans

--
http://www.twitter.com/sivabalans


Re: one question about CF security

harry zhang
 

Outbound traffic is not the response, it refers to how your app connect to the outside world.


Re: one question about CF security

Gwenn Etourneau
 

Inbound is connexion initiate from external, in this case dialog between
app and client is throught the LB / Gorouter

Outbound is connexion initiate from Internal that's mean your app want to
connect to something ....

Not sure I am clear ...

On Thu, Dec 10, 2015 at 1:35 PM, 姜恩龙jiangenlong <jiangenlong(a)hxdi.com>
wrote:

Hi,



· Inbound: From the load balancer through the router to the DEA,
then from the DEA to the App Container.

· Outbound: From the App Container to the DEA, then to the
gateway on the DEA virtual network interface.

· This gateway might be a NAT to external networks depending on
your IaaS.

· -------- this is come
from CloudFoundry official docs.





Do Load Balancer and NAT have the same ip? In other words, do the two
appliance locate on one host( or VM)?



If not, client send a request , destination ip is LoadBalancer’s address,
then client receive a response, source ip is NAT address.

I think, in this situation, client can not communicate with cloudfoundry.





Regards,

jiangenlong






*来自华信咨询设计研究院有限公司友情提醒:为确保邮件沟通畅通,如你不能投递到jiangenlong(a)hxdi.com
<jiangenlong(a)hxdi.com>,请临时将邮件地址中com变更为cn尝试投递,谢谢!*


Re: one question about CF security

Zhang Lei <harryzhang@...>
 

According to your graph, outbound traffic is not the response, it refers to how your app connect to the outside world.




--
Lei Zhang (Harry Zhang)

TEL: (+86) 15157180183
Cloud Team
VLIS Lab
Zhejiang University



在 2015-12-10 12:35:55,"姜恩龙jiangenlong" <jiangenlong(a)hxdi.com> 写道:


Hi,



· Inbound: From the load balancer through the router to the DEA, then from the DEA to the App Container.

· Outbound: From the App Container to the DEA, then to the gateway on the DEA virtual network interface.

· This gateway might be a NAT to external networks depending on your IaaS.

· -------- this is come from CloudFoundry official docs.





Do Load Balancer and NAT have the same ip? In other words, do the two appliance locate on one host( or VM)?



If not, client send a request , destination ip is LoadBalancer’s address, then client receive a response, source ip is NAT address.

I think, in this situation, client can not communicate with cloudfoundry.





Regards,

jiangenlong





来自华信咨询设计研究院有限公司友情提醒:
为确保邮件沟通畅通,如你不能投递到jiangenlong(a)hxdi.com,
请临时将邮件地址中com变更为cn尝试投递,谢谢!


one question about CF security

姜恩龙jiangenlong <jiangenlong at hxdi.com...>
 

[cid:image001.png(a)01D13347.127C0FB0]
Hi,


・ Inbound: From the load balancer through the router to the DEA, then from the DEA to the App Container.

・ Outbound: From the App Container to the DEA, then to the gateway on the DEA virtual network interface.

・ This gateway might be a NAT to external networks depending on your IaaS.

・ -------- this is come from CloudFoundry official docs.





Do Load Balancer and NAT have the same ip? In other words, do the two appliance locate on one host( or VM)?



If not, client send a request , destination ip is LoadBalancer’s address, then client receive a response, source ip is NAT address.

I think, in this situation, client can not communicate with cloudfoundry.





Regards,

jiangenlong



来自华信咨询设计研究院有限公司友情提醒:
为确保邮件沟通畅通,如你不能投递到jiangenlong(a)hxdi.com,
请临时将邮件地址中com变更为cn尝试投递,谢谢!


Cloud Foundry Org/Space Metadata Synchronization

Chaskin Saroff <chaskin.saroff@...>
 

As I project requirement, I'm attempting to extend some user preferences about an org/space. The requirement includes basic CRUD operations for these preferences with each preferences being **user level**. This means that each user gets their own preferences for each org that they are a part of. For example, a user, Bob in orgA should be able to set his first orgA preference to true and his second orgA preference to "banana".

At the moment, my architecture has these preferences stored in a couchdb database outside of cloud foundry. This approach works up to the point where a user is removed from an org that they have set preferences in. The same issue arises when an org is deleted and these same preference ideas and issues can be extended to spaces as well.

My question is, is there any way to keep my preferences database up to date with the data living in CF(via webhooks, etc)? Alternatively, is there some other method of storing these preferences that will mitigate these synchronization issues?

Hopefully this makes sense, but please ask for clarity if something isn't clicking.

The very best regards,
Chaskin


Re: How to use SSL with multi domain

Anuj Jain <anuj17280@...>
 

Thanks David/Shannon/Amit - this will solve my problem.

On Dec 10, 2015 7:25 AM, "Shannon Coen" <scoen(a)pivotal.io> wrote:

If you don't want to host the CF certs on your own load balancer, skip
HAProxy and terminate SSL at the Gorouter. In this scenario HAProxy is an
unnecessary network hop. Gorouter also only supports one certificate, but
you can support multiple domains in the same way David mentioned.

Shannon Coen
Product Manager, Cloud Foundry
Pivotal, Inc.

On Wed, Dec 9, 2015 at 4:40 AM, David Head-Rapson <dave(a)dhrapson.com>
wrote:

Adding your new custom domains as Aliases on 'SAN' SSL certificates is
the quickest way to get your SSL traffic enabled in the absence of
multi-cert support on HAProxy.


[abacus] Slight change to the summary and charge functions

Benjamin Cheng
 

Previously, the summary and charge functions only received the quantity/cost and query time. This caused issues with the query time fell outside of the specific window in time-based metrics.

These functions will now receive a from and to time that represents the lower bound of the current window and the upper bound of the current window respectively.


Re: How to use SSL with multi domain

Shannon Coen
 

If you don't want to host the CF certs on your own load balancer, skip
HAProxy and terminate SSL at the Gorouter. In this scenario HAProxy is an
unnecessary network hop. Gorouter also only supports one certificate, but
you can support multiple domains in the same way David mentioned.

Shannon Coen
Product Manager, Cloud Foundry
Pivotal, Inc.

On Wed, Dec 9, 2015 at 4:40 AM, David Head-Rapson <dave(a)dhrapson.com> wrote:

Adding your new custom domains as Aliases on 'SAN' SSL certificates is the
quickest way to get your SSL traffic enabled in the absence of multi-cert
support on HAProxy.


Re: Import large dataset to Postgres instance in CF

Siva Balan <mailsiva@...>
 

Hi Nick,
Your Option 1(Using psql CLI) is not possible since there is a firewall
that only allows connection from CF apps to postgres DB. Apps like psql CLI
that are outside of CF have no access to the postgres DB.
I just wanted to get some thoughts from this community since I presume many
would have faced a similar circumstance of importing large sets of data to
their DB which is behind a firewall and accessible only through CF apps.

Thanks
Siva

On Wed, Dec 9, 2015 at 2:27 PM, Nicholas Calugar <ncalugar(a)pivotal.io>
wrote:

Hi Siva,

You'll have to tell us more about how your PostgreSQL and CF was deployed,
but you might be able to connect to it from your local machine using the
psql CLI and the credentials for one of your bound apps. This takes CF out
of the equation other than the service binding providing the credentials.

If this doesn't work, there are a number of things that could be in the
way, i.e. firewall that only allows connection from CF or the PostgreSQL
server is on a different subnet. You can then try using some machine as a
jump box that will allow access to the PostgreSQL.

Nick

On Wed, Dec 9, 2015 at 9:40 AM Siva Balan <mailsiva(a)gmail.com> wrote:

Hello,
Below is my requirement:
I have a postgres instance deployed on our corporate CF deployment. I
have created a service instance of this postgres and bound my app to it.
Now I need to import a very large dataset(millions of records) into this
postgres instance.
As a CF user, I do not have access to any ports on CF other than 80 and
443. So I am not be able to use any of the native postgresql tools to
import the data. I can view and run simple SQL commands on this postgres
instance using the phppgadmin app that is also bound to my postgres service
instance.
Now, what is the best way for me to import this large dataset to my
postgres service instance?
All thoughts and suggestions welcome.

Thanks
Siva Balan

--
http://www.twitter.com/sivabalans

--
http://www.twitter.com/sivabalans


Quotas in CF

Rajesh Jain
 

In cf at an org level you have quotas for
1. Memory
2. Routes
3. Services

Two questions on quotas for routes and services:

Is there any correlation or best practice on assigning quotas for routes and services based on memory quota for an org.
For e.g 16 GB quota can have 8 app instances of 2 GB per instance and assuming 2 routes per app, you can assign (though not scientifically) quota of 16 routes?
What about service quota? And what is the memory footprint of a service instance on the org quota?

Thanks, Rajesh


Re: cf start of diego enabled app results in status code: 500 -- where to look for logs?

Eric Malm <emalm@...>
 

Hi, Tom,

It may be that Cloud Controller is unable to resolve the consul-provided
DNS entries for the CC-Bridge components, as that '10001 Unknown Error' 500
response sounds like this bug in the Diego tracker:
https://www.pivotaltracker.com/story/show/104066600. That 500 response
should be reflected as some sort of error in the CC log file, located by
default in /var/vcap/sys/log/cloud_controller_ng/cloud_controller_ng.log on
your CC VMs. It may even be helpful to follow that log in real-time with
`tail -f` while you try starting the Diego-targeted app via the CLI. To be
sure you capture it, you should tail that log file on each CC in your
deployment. In any case, a stack trace associated to that error would
likely help us identify what to check next.

Also, does `bosh vms` report any failing VMs in either the CF or the Diego
deployments?

Best,
Eric

On Wed, Dec 9, 2015 at 2:27 PM, Tom Sherrod <tom.sherrod(a)gmail.com> wrote:

I'm giving CF 225 and diego 0.1441.0 a run.
CF 225 is up and app deployed.
Stop app. cf enable-diego app. Start app:
FAILED
Server error, status code: 500, error code: 10001, message: An unknown
error occurred.
FAILED
Server error, status code: 500, error code: 10001, message: An unknown
error occurred.

CF_TRACE ends with:
REQUEST: [2015-12-09T17:17:37-05:00]
PUT
/v2/apps/02c68ddd-0596-4aab-8c05-a8f538d06712?async=true&inline-relations-depth=1
HTTP/1.1
Host: api.dev.foo.com
Accept: application/json
Authorization: [PRIVATE DATA HIDDEN]
Content-Type: application/json
User-Agent: go-cli 6.14.0+2654a47 / darwin

{"state":"STARTED"}

RESPONSE: [2015-12-09T17:17:37-05:00]
HTTP/1.1 500 Internal Server Error
Content-Length: 99
Content-Type: application/json;charset=utf-8
Date: Wed, 09 Dec 2015 22:17:36 GMT
Server: nginx
X-Cf-Requestid: 6edf0ac8-384f-4db3-576a-6744b7eb4b8c
X-Content-Type-Options: nosniff
X-Vcap-Request-Id:
860d73f9-9415-478f-6c60-13e2e5ddde8c::80a4a687-7f2d-44c5-9b09-4e3c9fa07b68

{
"error_code": "UnknownError",
"description": "An unknown error occurred.",
"code": 10001
}


Where next to look for the broken piece?


Re: cf start of diego enabled app results in status code: 500 -- where to look for logs?

Eric Malm <emalm@...>
 

Hi, Tom,

It may be that Cloud Controller is unable to resolve the consul-provided
DNS entries for the CC-Bridge components, as that '10001 Unknown Error' 500
response sounds like this bug in the Diego tracker:
https://www.pivotaltracker.com/story/show/104066600. That 500 response
should be reflected as some sort of error in the CC log file, located by
default in /var/vcap/sys/log/cloud_controller_ng/cloud_controller_ng.log on
your CC VMs. It may even be helpful to follow that log in real-time with
`tail -f` while you try starting the Diego-targeted app via the CLI. To be
sure you capture it, you should tail that log file on each CC in your
deployment. In any case, a stack trace associated to that error would
likely help us identify what to check next.

Also, does `bosh vms` report any failing VMs in either the CF or the Diego
deployments?

Best,
Eric

On Wed, Dec 9, 2015 at 2:27 PM, Tom Sherrod <tom.sherrod(a)gmail.com> wrote:

I'm giving CF 225 and diego 0.1441.0 a run.
CF 225 is up and app deployed.
Stop app. cf enable-diego app. Start app:
FAILED
Server error, status code: 500, error code: 10001, message: An unknown
error occurred.
FAILED
Server error, status code: 500, error code: 10001, message: An unknown
error occurred.

CF_TRACE ends with:
REQUEST: [2015-12-09T17:17:37-05:00]
PUT
/v2/apps/02c68ddd-0596-4aab-8c05-a8f538d06712?async=true&inline-relations-depth=1
HTTP/1.1
Host: api.dev.foo.com
Accept: application/json
Authorization: [PRIVATE DATA HIDDEN]
Content-Type: application/json
User-Agent: go-cli 6.14.0+2654a47 / darwin

{"state":"STARTED"}

RESPONSE: [2015-12-09T17:17:37-05:00]
HTTP/1.1 500 Internal Server Error
Content-Length: 99
Content-Type: application/json;charset=utf-8
Date: Wed, 09 Dec 2015 22:17:36 GMT
Server: nginx
X-Cf-Requestid: 6edf0ac8-384f-4db3-576a-6744b7eb4b8c
X-Content-Type-Options: nosniff
X-Vcap-Request-Id:
860d73f9-9415-478f-6c60-13e2e5ddde8c::80a4a687-7f2d-44c5-9b09-4e3c9fa07b68

{
"error_code": "UnknownError",
"description": "An unknown error occurred.",
"code": 10001
}


Where next to look for the broken piece?


Re: Import large dataset to Postgres instance in CF

Nicholas Calugar
 

Hi Siva,

You'll have to tell us more about how your PostgreSQL and CF was deployed,
but you might be able to connect to it from your local machine using the
psql CLI and the credentials for one of your bound apps. This takes CF out
of the equation other than the service binding providing the credentials.

If this doesn't work, there are a number of things that could be in the
way, i.e. firewall that only allows connection from CF or the PostgreSQL
server is on a different subnet. You can then try using some machine as a
jump box that will allow access to the PostgreSQL.

Nick

On Wed, Dec 9, 2015 at 9:40 AM Siva Balan <mailsiva(a)gmail.com> wrote:

Hello,
Below is my requirement:
I have a postgres instance deployed on our corporate CF deployment. I have
created a service instance of this postgres and bound my app to it. Now I
need to import a very large dataset(millions of records) into this postgres
instance.
As a CF user, I do not have access to any ports on CF other than 80 and
443. So I am not be able to use any of the native postgresql tools to
import the data. I can view and run simple SQL commands on this postgres
instance using the phppgadmin app that is also bound to my postgres service
instance.
Now, what is the best way for me to import this large dataset to my
postgres service instance?
All thoughts and suggestions welcome.

Thanks
Siva Balan

--
http://www.twitter.com/sivabalans


cf start of diego enabled app results in status code: 500 -- where to look for logs?

Tom Sherrod <tom.sherrod@...>
 

I'm giving CF 225 and diego 0.1441.0 a run.
CF 225 is up and app deployed.
Stop app. cf enable-diego app. Start app:
FAILED
Server error, status code: 500, error code: 10001, message: An unknown error occurred.
FAILED
Server error, status code: 500, error code: 10001, message: An unknown error occurred.

CF_TRACE ends with:
REQUEST: [2015-12-09T17:17:37-05:00]
PUT /v2/apps/02c68ddd-0596-4aab-8c05-a8f538d06712?async=true&inline-relations-depth=1 HTTP/1.1
Host: api.dev.foo.com
Accept: application/json
Authorization: [PRIVATE DATA HIDDEN]
Content-Type: application/json
User-Agent: go-cli 6.14.0+2654a47 / darwin

{"state":"STARTED"}

RESPONSE: [2015-12-09T17:17:37-05:00]
HTTP/1.1 500 Internal Server Error
Content-Length: 99
Content-Type: application/json;charset=utf-8
Date: Wed, 09 Dec 2015 22:17:36 GMT
Server: nginx
X-Cf-Requestid: 6edf0ac8-384f-4db3-576a-6744b7eb4b8c
X-Content-Type-Options: nosniff
X-Vcap-Request-Id: 860d73f9-9415-478f-6c60-13e2e5ddde8c::80a4a687-7f2d-44c5-9b09-4e3c9fa07b68

{
"error_code": "UnknownError",
"description": "An unknown error occurred.",
"code": 10001
}


Where next to look for the broken piece?


Re: App Container IP Address assignment on vSphere

Daya Shetty <daya.shetty@...>
 

Will,

We are using warden containers in our deployment and I was referring to the attributes defined in

./cf-release/jobs/dea_next/templates/warden.yml.erb

network:
pool_start_address: 10.254.0.0
pool_size: 256

and in ./cf-release/src/warden/warden/lib/warden/config.rb

def self.network_defaults
{
"pool_network" => "10.254.0.0/24",
"deny_networks" => [],
"allow_networks" => [],
"allow_host_access" => false,
"mtu" => 1500,
}
end

def self.network_schema
::Membrane::SchemaParser.parse do
{
# Preferred way to specify networks to pool
optional("pool_network") => String,

# Present for Backwards compatibility
optional("pool_start_address") => String,
optional("pool_size") => Integer,
optional("release_delay") => Integer,
optional("mtu") => Integer,

"deny_networks" => [String],
"allow_networks" => [String],
optional("allow_host_access") => bool,
}
end

Thanks
Daya


Re: FW: issue tracker permissions

Amit Kumar Gupta
 

I believe it will create a ZenDesk ticket, and someone from Tracker will
follow up. I've raised this issue before as well, IIRC the response was
it's something they've heard before, but wasn't something they were going
to do right away. You're right, there's no mechanism to raise an issue
that other people can then +1. Maybe Twitter?

On Wed, Dec 9, 2015 at 12:20 PM, Voelz, Marco <marco.voelz(a)sap.com> wrote:

Thanks for pointing me to this link. However, we seem to have the same
problem here: This seems like a fire-and-forget solution. Where does this
item go? How can I send it to other people and have them +1 it, like it,
follow it, favorite it or whatever is necessary to indicate that there is
more than 1 person wanting this feature?

Thanks and warm regards
Marco

On 09/12/15 20:01, "Amit Gupta" <agupta(a)pivotal.io> wrote:

If you're logged in to Tracker, there's a "Help & Updates" link at the
top, and one of the options is Provide Feedback.

On Wed, Dec 9, 2015 at 10:59 AM, Voelz, Marco <marco.voelz(a)sap.com> wrote:

I'd happily submit a feature request to build up some visible demand for
this – could you point me to the right channel here?

Thanks and warm regards
Marco

On 08/12/15 23:01, "Dieu Cao" <dcao(a)pivotal.io> wrote:

Unfortunately in order to follow a story in tracker, the minimum required
level is "member" which allows you to create/comment/delete stories in
tracker.
I would suggest submitting a request to the pivotal tracker team to help
build up evidence that this is a feature that people want.

-Dieu

On Tue, Dec 8, 2015 at 12:49 PM, Matt Cholick <cholick(a)gmail.com> wrote:

Sorry to resurrect an older thread, but I wanted to chime in that this
is a frustration I have too. There are several stories in the various CF
teams public backlogs that I'd like to keep track of.

Is it possible for community members to get enough permissions on our
tracker accounts to add ourselves to the follow list?

-Matt

On Mon, Nov 23, 2015 at 3:10 AM, Koper, Dies <diesk(a)fast.au.fujitsu.com>
wrote:

Hi Marco, Jan,

I sent an email to Tracker support about that last week because we were
hoping to close CLI feature requests on GH and let people follow the
stories on Tracker. Support confirmed that people need to have R/W access
to a project to do that.
I have just replied to ask if they'd consider an enhancement. Not sure
what the proper channel would be to get such a story prioritized.
Will let you know if I get a reply.

Regards,
Dies Koper
Cloud Foundry CLI PM

-----Original Message-----
From: Voelz, Marco [mailto:marco.voelz(a)sap.com]
Sent: Monday, November 23, 2015 8:00 PM
To: Discussions about Cloud Foundry projects and the system overall.
Subject: [cf-dev] Re: FW: issue tracker permissions

Thanks Jan for bringing that up, I've had similar problems with that as
well. Any ideas on how to solve this? Is this a feature that the tracker
team actively works on?
Hitting cmd+r every few days on the same stories doesn't seem like the
best way to stay informed about your favorite features.

Warm regards
Marco



On 19/11/15 09:23, "Sievers, Jan" <jan.sievers(a)sap.com> wrote:

Hi,

I was trying to watch a story I am interested in
https://www.pivotaltracker.com/n/projects/892938/stories/105493826


I do have an account but it seems I don't have permissions to watch
nor to comment.

Is there something I missed?

Regards
Jan



Re: FW: issue tracker permissions

Marco Voelz
 

Thanks for pointing me to this link. However, we seem to have the same problem here: This seems like a fire-and-forget solution. Where does this item go? How can I send it to other people and have them +1 it, like it, follow it, favorite it or whatever is necessary to indicate that there is more than 1 person wanting this feature?

Thanks and warm regards
Marco

On 09/12/15 20:01, "Amit Gupta" <agupta(a)pivotal.io<mailto:agupta(a)pivotal.io>> wrote:

If you're logged in to Tracker, there's a "Help & Updates" link at the top, and one of the options is Provide Feedback.

On Wed, Dec 9, 2015 at 10:59 AM, Voelz, Marco <marco.voelz(a)sap.com<mailto:marco.voelz(a)sap.com>> wrote:
I'd happily submit a feature request to build up some visible demand for this – could you point me to the right channel here?

Thanks and warm regards
Marco

On 08/12/15 23:01, "Dieu Cao" <dcao(a)pivotal.io<mailto:dcao(a)pivotal.io>> wrote:

Unfortunately in order to follow a story in tracker, the minimum required level is "member" which allows you to create/comment/delete stories in tracker.
I would suggest submitting a request to the pivotal tracker team to help build up evidence that this is a feature that people want.

-Dieu

On Tue, Dec 8, 2015 at 12:49 PM, Matt Cholick <cholick(a)gmail.com<mailto:cholick(a)gmail.com>> wrote:
Sorry to resurrect an older thread, but I wanted to chime in that this is a frustration I have too. There are several stories in the various CF teams public backlogs that I'd like to keep track of.

Is it possible for community members to get enough permissions on our tracker accounts to add ourselves to the follow list?

-Matt

On Mon, Nov 23, 2015 at 3:10 AM, Koper, Dies <diesk(a)fast.au.fujitsu.com<mailto:diesk(a)fast.au.fujitsu.com>> wrote:
Hi Marco, Jan,

I sent an email to Tracker support about that last week because we were hoping to close CLI feature requests on GH and let people follow the stories on Tracker. Support confirmed that people need to have R/W access to a project to do that.
I have just replied to ask if they'd consider an enhancement. Not sure what the proper channel would be to get such a story prioritized.
Will let you know if I get a reply.

Regards,
Dies Koper
Cloud Foundry CLI PM

-----Original Message-----
From: Voelz, Marco [mailto:marco.voelz(a)sap.com<mailto:marco.voelz(a)sap.com>]
Sent: Monday, November 23, 2015 8:00 PM
To: Discussions about Cloud Foundry projects and the system overall.
Subject: [cf-dev] Re: FW: issue tracker permissions

Thanks Jan for bringing that up, I've had similar problems with that as well. Any ideas on how to solve this? Is this a feature that the tracker team actively works on?
Hitting cmd+r every few days on the same stories doesn't seem like the best way to stay informed about your favorite features.

Warm regards
Marco



On 19/11/15 09:23, "Sievers, Jan" <jan.sievers(a)sap.com<mailto:jan.sievers(a)sap.com>> wrote:

Hi,

I was trying to watch a story I am interested in
https://www.pivotaltracker.com/n/projects/892938/stories/105493826


I do have an account but it seems I don't have permissions to watch nor to comment.

Is there something I missed?

Regards
Jan


Re: App Container IP Address assignment on vSphere

Daya Shetty <daya.shetty@...>
 

Thanks Gwenn!


Re: [cf-env] [abacus] Changing how resources are organized

Jean-Sebastien Delfino
 

It depends if you still want usage aggregation at both the resource_id and
resource_type_id levels (more changes as that'll add another aggregation
level to the reports) or if you only need aggregation at the
resource_type_id level (and are effectively treating that resource_type_id
as a 'more convenient' resource_id).

What aggregation levels do you need, both, or just aggregation at that
resource_type_id level?

- Jean-Sebastien

On Mon, Dec 7, 2015 at 3:19 PM, dmangin <dmangin(a)us.ibm.com> wrote:

Yes, this is related to github issue 38.

https://github.com/cloudfoundry-incubator/cf-abacus/issues/38

We want to group the buildpacks by a resource_type_id and bind resource
definitions to the resource_type_id rather than to the resource_id.
However,
when we make this change, how will this affect how abacus is doing all of
the calculations. The only change that I can think of is for abacus to use
the resource_type_id rather than the resource_id when creating the reports.





--
View this message in context:
http://cf-dev.70369.x6.nabble.com/cf-dev-abacus-Changing-how-resources-are-organized-tp2971p2991.html
Sent from the CF Dev mailing list archive at Nabble.com.

6361 - 6380 of 9410