cf-bosh@lists.cloudfoundry.org

Home Messages Hashtags Subgroups

Messages

Between

and

Adding security groups in resource_pools instead of networks

Dear Boshers, we currently encounter a problem which has been discussed briefly before on the list [1]: Adding security groups in resource pools should be possible. On a side note: we are dealing

By Marco Voelz · #703 ·

Re: Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update

Great Ramesh..

By Parthiban Annadurai <senjiparthi@...> · #702 ·

Relation between Network property in Resource pool property and Network property in Actual Job block

Hello All, I have a resource pool , let say small_z1 - name: small_z1 network: cf1 stemcell: stemcell-xyz cloud_properties: instance_type: m1.small availability_zone:

By Ronak Banka · #701 ·

Re: Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update

I finally figured it out. It is my bad, I missed the properties.uaa.jwt.signing_key/verification_key in my manifest. It is something I thought I took care of it, but must have overwritten in

By Ramesh Sambandan · #700 ·

Re: Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update

Try after "bosh cck" and again re-deploy it.. Most of the Times it will work..

By Parthiban Annadurai <senjiparthi@...> · #699 ·

Re: Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update

You can create a gist of manifest from github and link it here.

By Ronak Banka · #698 ·

Re: Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update

I am using cf release 215. I am trying to attach my manifest, but cannot figure out how to.

By Ramesh Sambandan · #697 ·

Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update

I am trying in deploy cloud foundry in vsphere and getting following error Started updating job api_z1 > api_z1/0. Failed: `api_z1/0' is not running after update (00:10:31) Following is entries in

By Ramesh Sambandan · #696 ·

Error: Public uaa token must be PEM encoded

Hi, I'm trying to deploy cloudfoundry on openstack. I'm getting stuck at bosh deploy. The result from bosh vms: +------------------------------------+---------+---------------+---------------+ |

By JOSE FELIX HERNANDEZ BARRIO · #695 ·

Re: Deploy CF Diego Release on OpenStack

Thanks Johannes Hiemer <jvhiemer(a)gmail.com>于2015年9月6日周日下午5:14写道： -- Best Regards~! Grissom

By 王天青 <wang.tianqing.cn at gmail.com...> · #694 ·

Re: Deploy CF Diego Release on OpenStack

Hi Wang, I wrote a blog post you can read about here: http://www.evoila.de/cloud-foundry/adding-diego-release-to-cloud-foundry-release-v212/?lang=en -- Mit freundlichen Grüßen Johannes Hiemer

By Johannes Hiemer · #693 ·

Deploy CF Diego Release on OpenStack

Hi all, When deploying Cloud Foundry on OpenStack using BOSH, there is a good reference doc: http://docs.cloudfoundry.org/deploying/openstack/install_cf_openstack.html. For Diego release, is there any

By 王天青 <wang.tianqing.cn at gmail.com...> · #692 ·

Re: health metrics via bosh

Thanks. I will have a look into this. -- Stephan Von: Dmitriy Kalinin Antworten an: "Discussions about the Cloud Foundry BOSH project." Datum: Dienstag, 1. September 2015 19:25 An: "Discussions

By Klevenz, Stephan <stephan.klevenz@...> · #691 ·

Re: Live Migrating OpenStack VMs between physical nodes

most of time with live migration you should only experience a few seconds of downtime

By ramonskie · #690 ·

Re: Bosh target password.

Thanks,Dmitriy. That helps. wrote:

By Guruprakash Srinivasamurthy <guruprakashsrinivasamurthy@...> · #689 ·

Re: Bosh target password.

If you are able to upgrade (with bosh-init or micro deploy) to a newer version of BOSH ( v177+ / 1.2999.0) you can redeploy your Director with pre-configured users as explained

By Dmitriy Kalinin · #688 ·

Bosh target password.

Hi, We lost track of password for one of the micro bosh director and we are unable to login to the target. Is there a way we can reset the password that we use to target the bosh director

By Guruprakash Srinivasamurthy <guruprakashsrinivasamurthy@...> · #687 ·

Re: Live Migrating OpenStack VMs between physical nodes

I am not too familiar with OpenStack's *live* migration. Do VMs lose connectivity when moved around by OpenStack? Ramon.Makkelie(a)klm.com> wrote:

By Dmitriy Kalinin · #686 ·

Re: Live Migrating OpenStack VMs between physical nodes

when you want to migrate or evacuate hosts you will notice that bosh will try to respawn the vms/jobs he created because of the health monitor so what we normally do is disable the bosh health

By ramonskie · #685 ·

Re: Live Migrating OpenStack VMs between physical nodes

OpenStack CPI does not care / is not aware on which node VMs are running. As long as VM remains powered on and accessible you should not have a problem. In practice you may run into certain OpenStack

By Dmitriy Kalinin · #684 ·

2061 - 2080 of 2763

Home Hashtags Subgroups Terms