cf-bosh@lists.cloudfoundry.org

Home Messages Hashtags Subgroups

Messages

Between

and

2 NICs on vSphere

Hi all, I'm trying to deploy a job with 2 NICs (internal and external networks) to expose the job to Internet. I get empty resolv.conf every time when I add second interface. When I use only one

By Prysmakou Aliaksandr <aliaksandr.prysmakou@...> · #81 ·

Re: Issue on re-deploy to AWS - static IP already reserved/in use

Hi, Sorry, it looks like Nabble stripped out the ‘bosh vms’ output, which was: +-----------------+---------+---------------+---------------+ | Job/index | State | Resource Pool | IPs

By Gareth Clay · #82 ·

Re: 2 NICs on vSphere

This could be related to some issues we had with multiple nics. There is a pull request: https://github.com/cloudfoundry/bosh-agent/pull/14 wrote:

By Matthew Boedicker · #83 ·

Re: 2 NICs on vSphere

DNS should properly be configured. You are about the gateway though. I'll try to repro the case today. Sent from my iPhone

By Dmitriy Kalinin · #84 ·

Re: Issue on re-deploy to AWS - static IP already reserved/in use

if you have specified your elastic IP in the manifest associated with a deployment job, BOSH will make sure it's connected and will not do any additional work on the subsequent deploys. Btw I cannot

By Dmitriy Kalinin · #85 ·

How to make a micro bosh AMI in AWS

Hi, there I am trying to deploy cloudfoundry environment in AWS China ( http://www.amazonaws.cn/), which is a bit different from golbal AWS ( http://aws.amazon.com/cn/). The most difficult part for

By 王小锋 <zzuwxf at gmail.com...> · #86 ·

Re: 2 NICs on vSphere

We have confirmed that bosh-init does not properly set things up; however, when using the Director it _does_ correctly configure DNS when multiple networks are specified for a job. Is this what you

By Dmitriy Kalinin · #87 ·

[ann] Bumped vSphere stemcell hardward version to 8

Hey all, vSphere stemcell version 2972 is now using hardware version 8 [1]. Dmitriy [1] https://github.com/cloudfoundry/bosh/commit/ac26c2e793c4108ab867d0e6b7f08ff801fddcbb

By Dmitriy Kalinin · #88 ·

Re: 2 NICs on vSphere

Dmitry, could you please tell what's the problem with bosh-init? Because currently I see a similar problem and I thought that it happens in CPI or IaaS. Is there any description / ticket / issue

By Alexander Lomov · #89 ·

Re: How to make a micro bosh AMI in AWS

If you use a normal (non-light) stemcell then `bosh micro deploy` will create a private AMI for you. You will need to be in an AWS China VM, a jumpbox/bastion/work VM. Use one of these stemcells

By Dr Nic Williams · #90 ·

Re: How to make a micro bosh AMI in AWS

i you pull down a "light" stemcell, you can see in the stemcell.MF file what regions are supported. ami: eu-west-1: ami-7f443108 ap-northeast-1: ami-5ca76c5c us-west-1: ami-d143ad95

By James Bayer · #91 ·

Changeing IP Addresses of containers

I want to run two cloud foundry instances on my notebook to try something out. I have a problem setting the IP addresses to a range in one of them, so that they can be resolved from the host machine

By Hildebrandt Andre <myself@...> · #92 ·

Create bosh stemcell failed in AWS region cn-north-1

Hello, I tried to deploy micro bosh in AWS region cn-north-1 in several ways, but all failed. Any suggestions on how to deploy micro bosh in AWS region cn-north-1? Thanks! I created a EC2 instance

By 支雷 <lzhi3937 at gmail.com...> · #93 ·

Re: Issue on re-deploy to AWS - static IP already reserved/in use

Hi Dmitriy, Thanks and sorry again for the slow response. Nabble stripped out my bosh vms output unfortunately - I’ve created a gist at https://gist.github.com/spikymonkey/9938dcdcc7a9a6097183

By Gareth Clay · #94 ·

Re: Create bosh stemcell failed in AWS region cn-north-1

The issue is that there appear to not be any light stemcells in your region, there is another recent question on the list to this effect. In order to make progress you might want to build your own

By Wayne E. Seguin · #95 ·

Re: OpenSSL v0.9.8 in CF Ruby Buildpack 1.4

Hi Mike, May be the following will help you reproduce the problem without having to setup Jenkins But to give you little more context. We have a Jenkins build slave which is container instantiated

By Daya Sharma <dsharma@...> · #96 ·

(No subject)

Hi guys, Is there a rough way to calculate how much physical servers a certain deployment will need? Let's say I have an application with 50 instances, RAM = 500Mo and Disk = 100 Mo. My servers are

By Corentin Dupont <corentin.dupont@...> · #97 ·

Re: OpenSSL v0.9.8 in CF Ruby Buildpack 1.4

Daya, Thanks for confirming that you're using the `ruby-buildpack`, intended for us in a container rootfs, on the stemcell. As I mentioned earlier in this thread, that's not supported with the

By Mike Dalessio · #98 ·

Re: 2 NICs on vSphere

bosh-init was not properly assigning which network should be used for DNS and gateway settings: https://www.pivotaltracker.com/story/show/94624368 alexander.lomov(a)altoros.com> wrote:

By Dmitriy Kalinin · #99 ·

Re: 2 NICs on vSphere

Thank you, Dmitriy.

By Alex Lomoff <lomov.as@...> · #100 ·

81 - 100 of 2763

Home Hashtags Subgroups Terms